Hello Everyone,

We need a PC Based Ramp Tester Software. This software will allow user to test standard aerospace navigational indicator from a laptop without any other additional devices or equipment.

In order to get this Ramp Tester, we will need the following experience for you to possess :
a. Well versed with avionics
b. Well versed with RF technology
c. Excellent in C++/Matlab/Labviw etc...
d. FLASH for user interface
e. Can work alone and get the project as DELIVERABLE to us.

To complete the project, recommended steps :
1. Open source signal generators. (This software will generate the required frequencies and signals to allow deflections of the navigational indicator as installed in an aircraft.)
2. ARINC 429 box. (The software will be PC based and a USB connection will be connected to the navigational unit.)
3. Flash User Software. (Make the software User friendly)

The ARINC box needs to be made by you. Only 1 unit will be required for the project to be considered as completed.

Note : I cannot provide ANY assistance or inputs as I am not a avionics tech or knowledgeable in this field.

All coding are to be handed over on acceptance along with the schematic for the ARINC 429.

What needs to be tested on this Avionics PC Based Tester?
i. ILS
ii. VOR
iii. LOC
iv. Marker Beacon

Questions? Please post and will try my level best to revert asap.

Thanks

2LeftFoot
Note : The successful bidder will get another 4 other projects when completed.